ZC0005 Current Sensor is used to measure the current in circuit. It can be used in DC and AC circuit.
Specification
| Range | -3A~+3A |
| Resolution | 0.002A |
| Accuracy | ±1%F.S |
Usage
1.Connect the current sensor to computer by USB cable.
2. Open the SWR iLab V8.0 software.
3. Click 'New' to create new experimental template.
Notes
- The Multi-Range Current Sensor needs calibration before use, the method please refer to the 'Calibration'.
- The Multi-Range Current Sensor should series connect to circuit.
- The current goes into the sensor from the red conducting wire, and goes out from the black conducting wire and it shows a positive value, or it will show a negative value.
- When measuring, please do not make the measured current exceeds the range of the sensor.
Typical experiment
-
Measure the electrodynamic potential and internal resistance of battery
-
VA characteristics of small bulb, diode and conductor
-
Ohm's law
-
Series and parallel connection of resistor
){kind=link}
){kind=link}