The Voltage Sensor is used to measure voltage within -60mV to 60mV. It amplifies the input voltage in order to measure voltage in micro level.
Specification
Range: -60~60mV
Accuracy: ±1%
Resolution: 0.03mV
Input impedance: 1MΩ
Usage
Connect Voltage Sensor to any port in SenseDisc.
Connect red and black alligator clips to positive and negative poles in Voltage Sensor.
Parallel connect Voltage Sensor into circuit.
Voltage Sensor should be calibrated before using. Refer to calibration.
Typical experiment
-
Charging and discharging for capacitor.
Notes
-
Voltage Sensor should be parallel connected to the circuit during using.
-
Voltage Sensor needs to be calibrated before using.
-
The maximum voltage can be applied to sensor is 500mV.
){kind=link}