ZC0007 Milli Current Sensor is used to measure weak electric current signal in a circuit.
Specification
| Range | -20mA~20mA |
| Resolution | 0.01mA |
| Accuracy | ±1%F.S |
| Internal resistance | 200mΩ |
Usage
1.Connect the Micro Current Sensor to computer by USB cable.
2.Open the SWR iLab V8.0 software.
3. Click 'New' to create new experimental template.
Notes
-
The Milli Current Sensor needs calibration before use, and should be connected in series in the circuit.
-
When measuring, make sure the current to be measured does not exceed the measuring range of the sensor.
-
Ground the negative pole of sensor during measuring in order to achieve higher accuracy if it is possible.
-
After the experiment, preserve the sensor in a dry place.
Typical experiment
-
The charging and discharging of capacitor
-
VA characteristics of small bulb, diode and conductor
-
Glass conduct
){kind=link}
){kind=link}